Additional information
Certification | CE / EU |
---|---|
Feature | Stocked |
Type | Kitchen Lighters |
Origin | Mainland China |
Model Number | CN1 |
Material | Plastic |
Plastic Type | Melamine |
140.00 $
50 in stock
Certification | CE / EU |
---|---|
Feature | Stocked |
Type | Kitchen Lighters |
Origin | Mainland China |
Model Number | CN1 |
Material | Plastic |
Plastic Type | Melamine |
Basic parameters 1, rated working voltage: AC220V 2, normal working voltage range: AC187-242V
3, the service life: the number of actions is not less than 100,000 times 4, fan power: no more than 600W
5, ignition output: AC220V, power is not more than 100W
6, electromagnetic pump / valve output: AC220V, power is not more than 100W
7, circulating water pump output: AC220V, power is not more than 1000W Wiring instructions
1. Brown-blue black sheathed wire: Connected to 220V AC power supply, the leakage circuit breaker and a bipolar switch should be installed at the front end of the power supply to play the role of reliable control of the total power supply and safety protection. 2, red-black white sheathed wire: plug the fan.
3. Brown-blue black sheathed wire with cold-pressed round female insert: plug in electromagnetic pump/solenoid valve.
4. Black sheathed cable with black combination connector: plug the 220V igniter.
5. Small black sheathed wire brown-blue temperature sensor wire.
6. Red-black black sheathed wire with cold-pressed round male connector: The red wire is connected to the fire needle, and the black wire is connected to the burning ground of the burner.
7. Brown-blue black sheathed wire with cold-pressed flat female insert: circulating water pump. Automatic mode operation and job description
After power-on, press the combustion start/stop button to start in the oFF state. After starting, it will start to burn according to the current temperature less than the starting temperature. When the temperature is higher than the stop temperature, the combustion will stop. The starting sequence is -> pre-fan cleaning-> ignition-> oil pump 1-> Detecting flame-> After 10 seconds, open the oil pump 2. During the intermediate process, no fire is detected. After the automatic ignition for 10 seconds, if the flame is not detected, the error will be reported. Turn off the ignition, oil pump, and fan after cleaning 10; After the normal shutdown or when the stop temperature is reached, the combustion is turned off and the fan is cleaned. Timed On Reservation Mode Operating Instructions
After power-on, press the display time button in the oFF state, the timing indicator flashes, the time indicator light is always on, and the hour and minute digital tube displays 00,00. If you need to set the time, you need to enable it in the non-zero state. Zero state 5 seconds automatically start or manually press the time button to quickly start; when the setting is out of time, you can set the required time by pressing the hour or minute plus or minus button. The time countdown returns to 00,00 to start the system.
Cancel the reservation mode operation: Press the display time button in the display time state to cancel the current setting mode. timed off time mode operation instructions
Press the display time button in the working state, the timing indicator flashes, the time indicator light is always on, the hour and minute digital tube displays 00,00, if you need to set the time, you need to be in the non-zero state to enable, in the non-zero state for 5 seconds. Automatic start or manual press the time button to quickly start; when the setting is out of time, you can set the required time by pressing the hour or minute plus or minus button. When the time counts back to 00,00, the system is turned off.
Cancel time mode operation: Press the display time button in the display time state to cancel the current setting mode.
Control the combustion temperature setting operation instructions
Press the display temperature button in the working state or the reservation mode or time mode, the display temperature indicator is always on, the start temperature can be adjusted according to the increase or decrease of the start temperature, and the stop temperature can be adjusted according to the increase or decrease of the stop temperature; The set value can be confirmed, and it is automatically confirmed without pressing for 5 seconds. System parameter setting description
The following instructions are all performed when the controller's settings are in the factory state and the controller is powered on. Whether other interfaces are connected or not connected does not affect the setting operation.
After the controller is powered on, all the digital tubes and LED indicators will be lighted up. You can use this opportunity to check whether there are any missing or missing lights. Finally, the digital tube displays OFF, which is the shutdown state.
Press the start/stop button in the power off state, and the system enters the working state.
1. Modify the system parameters: Press and hold the setting button for about 3 seconds, and the red digital tube displays HEn.
★ Parameter confirmation save: adjust the parameters, press and hold the setting button, the number starts to flash until the red display SAU, indicating that the parameter is saved successfully, and the system exits the setting state.
★ Press the Set button to enter HEn, odH, oNF, oFF, obt, and set the parameters as described above. Finally, press and hold the Set button until SAU is displayed, and all parameters are saved before the one-time completion.
★If the above operation does not long press the setting button and display SAU, the new parameters will not be officially saved. If there is no operation for a few seconds or the system is started by pressing the start/stop button, the system will still run according to the original parameters.
1 HEn menu is the fire detection option; default value: 1; setting range: 0-1.
★Parameter meaning: 1 is to enable the fire detection function, 0 is to turn off the fire detection function, and the work process does not check the fire.
2 odH menu is the continuous ignition time option; default value: 12; setting range: 0-20 seconds.
★Parameter meaning: After the electromagnetic pump is working, the ignition output will stop after the corresponding time.
3 The oNF menu is the pre-cleaning option; the default value is 10; the setting range is 0-20 seconds.
★ The meaning of the parameter is: cleaning before starting the ignition.
4 The oFF menu is the post-cleaning option; the default value is 10; the setting range is 0-20.
★ The meaning of the parameter is: clean after turning off the fire.
5 The obt menu is the temperature option for the circulating water pump; default value: 35; setting range: 35-80 seconds.
★The meaning of the parameter is: when the water temperature is greater than or equal to this temperature, the circulating water pump is turned on less than the circulating water pump. Fault description: E-1: pseudo fire E-2: Ignition failure E-3: Unexpected flameout E-4: Open temperature line E-5: Thermal line short circuit
1, working voltage: AC220V 2, working voltage range: AC175-245V 3, service life: ≥100,000 times 4, ignition intensity: high-pressure powerful ignition, can ignite flammable gas and vaporized alcohol-based biofuels, 5, the igniter is sealed with epoxy resin, waterproof and moisture-proof. 6, ignition time: 12 seconds, can also be adjusted according to customer needs. Second, the commercial stove igniter - DQ2 lead wire plug connection instructions 1. Two high-voltage ignition wires 800mm are connected to the double-pin ignition needle for relative ignition, or one high-voltage ignition wire 800mm is connected to the ignition needle, and the other high-voltage ignition wire 800mm is [...]
67.50 $ Add to cartInfrared beam debugging: a. The receiving head with a glass window at the side end of the aluminum infrared component has a built-in infrared receiving element and a status indicator. The light is always on to indicate that the correct infrared signal is received, indicating that the infrared light is not blocked, and the direction of emission and reception is basic Normal, in the effective range. On the contrary, the flashing light indicates that no infrared signal is received, indicating that the infrared light is blocked or emitted by the pot, and the receiving direction is not within the effective [...]
83.75 $ Add to cartHW-103 igniter: also known as industrial furnace pulse ignition controller, this product is mainly used for ignition and control of various industrial equipment and hotel stoves using liquefied gas, natural gas, artificial gas. Power-on ignition or switch-controlled ignition accidental flameout key ignition function, ion flame automatic monitoring function and flameout alarm, ignition failure and accidental flameout automatically cut off gas source safety protection, using microcomputer digital control technology, using lightning protection technology Power-on ignition/switch Control the ignition, stop the ignition after the flame is automatically detected, the solenoid valve keeps the combustion indicator light on, and when the ignition time [...]
92.50 $ Add to cartN5/N5K/N5F/N5B Controller function description V3.0 and above 1. Function introduction This controller is an integral plastic case moisture-proof structure, with its own lead wire, fan control, igniter control, electric Magnetic pump control, 5-speed firepower and fine-tuning stepless firepower adjustment, multiple start-stop controls are convenient and flexible, and each parameter can be Custom settings. . Model description: N5 is a general type: N5B Adds the front valve of the pump to the general basis: N5K, in the general type Add external connection, pressure cooker flame off/pressure cooker on fire/foot switch/quick start-stop switch, etc. functions can be followed according to Need to [...]
94.45 $ Add to cartY2 commercial gas stove flameout safety protection ignition controller function description The controller is used on commercial stoves to realize automatic high-energy ignition and accidental flameout protection to meet the automatic control and safety protection of modern kitchen stoves. First, Y2 commercial stove flameout safety protection controller basic parameters 1, product model: Y2. 2, working voltage range: AC175-245V 3, service life: ≥100,000 times 4, ignition intensity: high-energy ignition, can easily ignite combustible gases and various alcohol-based biofuels. 5, there is an accidental flameout safety protection function, when the accidental flameout, the solenoid valve is closed and an alarm sounds. 6, [...]
158.75 $ Add to cartCommercial stove infrared anti-air burning controller function description The controller is a commercial stove controller without fan control the fan can be independently controlled, which can realize automatic high-energy ignition and anti-air burning, and meet the needs of automatic control and safety protection of modern kitchen stoves. Controller working process: The controller turns on the power switch, starts ignition, opens the air valve, and after 12 seconds, the ignition stops and enters the combustion state. At this time, the infrared sensor head and the receiving head constitute a pot sensor to detect whether there is a pot on the furnace, [...]
177.50 $ Add to cartPortable Electric Arc Lighter USB Rechargeable Windproof Electronic Lighter Eco-friendly Aromatherapy for Candles Gas Stoves Feature: 1.Windproof and Flameless Technology: The Arc lighter adopt windproof design and flameless plasma technology to protect the electric pulse from being blown out by strong wind or wet weather. 2.Safty Protection: Its so much easier to light candles with this than traditional butane lighters or matches. A safety lock design keeps children away from fire. The long and flexible soft head allows you to keep a safe distance from sparks. 3.USB Charging: The lighter uses a [...]
Portable Electric Arc Lighter USB Rechargeable Windproof Electronic Lighter Eco-friendly Aromatherapy for Candles Gas Stoves Feature: 1.Windproof and Flameless Technology: The Arc lighter adopt windproof design and flameless plasma technology to protect the electric pulse from being blown out by strong wind or wet weather. 2.Safty Protection: Its so much easier to light candles with this than traditional butane lighters or matches. A safety lock design keeps children away from fire. The long and flexible soft head allows you to keep a safe distance from sparks. 3.USB Charging: The lighter uses a lithium [...]
Functional description of infrared anti-air burning controller for commercial stoves This controller is used on commercial gas stoves, which can realize infrared control. Controller working process: Turn on the power switch, the controller starts to ignite, and the solenoid valve is opened at the same time. After 12 seconds, the ignition stops and enters the burning state. At this time, the pot sensor composed of the infrared emitting head and the receiving head detects whether there is a pot on the stove, such as If the infrared light is blocked, it means there is a pot and keep the burning [...]
121.25 $ Add to cartHello Welcome to our store! Quality is the first with best service. customers all are our friends. Portable automatic ignition snap-on butane metal field barbecue heating flame gun welding gas torch feature: 100 brand new and high quality Can be upside down Output power rate: 960kcal / 1.11kw / 3809BTU Burning value: 80g / h Flame temperature: up to 1300° Air consumption: 50g-140g / h Each tank of gas can be used for 1.6h-2h It only takes 2 seconds to change gasoline Weight: 174g Length: 17.5 cm Package Contents: 1x flame gun not including gas tank note: 1. Please keep [...]
DY2 basic parameters The DY2 high-energy igniter developed by the company is AC220V igniter. The shape of the spark is a flame, which is like an open flame. The ignition energy is strong, the performance is stable and reliable, and the ignition efficiency is high. It is widely used in commercial energy-saving stoves, boilers, burners, steamers, ovens and other commercial equipments that use gas and methanol as fuel. 1, product model: DY2. 2, the main function: delayed high-energy ignition, low-voltage jog switch start. 3, working voltage range: AC175V-245. 4, the service life: ≥ 100,000 times. 5, ignition intensity: high-energy ignition, [...]
75.00 $ Add to cartDescription: Features: This sparking lighter will allow you to light your gas hob or stove safely. It is a safer option for you and your family as it does not have a flame. Battery operated requires 1 x AA battery which is not included, simply press the button on the comfort shaped satin finish handle to spark. Specification: • Safer option for you and your family • Ergonomic satin handle • Suitable for continuous use due to its sparking lighter • Requires 1 x AA Battery Not included • The long shaft ensures [...]
Description: product description 1. Connect this product, car transmitter, car oxygen bar, car remote charger and other related electrical appliances can be used at home! 2. There are more and more automobile appliances using cigarette lighter. Now, with our product, you can take the baby that you used to only use on the automobile home and use it to the best of your ability! 3. Insert the product into the power socket at home, and then you can insert some automobile cigarette lighter equipment into the product, such as automobile aromatherapy device, automobile oxygen bar, vehicle transmitter and other low-power [...]
Bullet Points: 1、Wide Features: Cigarette lighter female head with wire, tail peeled and tinned. Alligator clip can be welded, EC5 plug, SAE solar plug, U-shaped terminal, O-shaped round terminal, 250 terminal, etc. 2、Directly Connected Battery: Can be directly connected to the battery. 3、Suitable Ocns: Suitable for any DC 12V/24V motorcycles, boats, riding lawn mowers, tractors, automobiles, etc. 4、Brand-new and High Quality: 100 brand new and high quality. 5、Convenient Use: Convenient to use, easy to install, free combination. Specification: x x 5.4mm/0.11 x 0.21in Packing List: 1 x [...]
DC 100V Amp Volt Gauge Dual LED Display 10A Voltage Current Meter High Precision Amp Volt Tester Multifunctional Instrument Tool Feature: 1: Note: On-board shunt resistor, no need to connect additional shunt 2: Function: Cost-effective and cost-effective 3: Easy to use: Simple to use and easy to operate. Small appearance, easy to carry 4: Shell material: The voltmeter is made of high quality and durable ABS material 5: Size: The size of the voltmeter is 47.63 x 28.66 x 23.74mm Specification: Certification: CE Origin: Mainland China DIY Supplies: ELECTRICAL Display [...]
Material: Flocking PVC Inflatable Sizeapprox.: 26 x 42cm10.23 x 16.53inch After Inflatable Sizeapprox.: 33.5 x 22cm13.18 x 8.66inch Weightapprox.: 41g Package:1 x U Shape Neck Pillow Note: Because of the different batches of products, Inflatable nozzle has two different styles. Due To The Light and Screen Setting Difference, Item's Color May Be Slightly Different From The Pictures. Please Difference Due To Different Manual Measurement And Special Material. Material: Flocking PVC Inflatable Sizeapprox.: 27 x 44cm After Inflatable Sizeapprox.: 34 x 22cm x 11cm Weightapprox.: 43g Package:1 x U Shape Neck Pillow Note: Due To The Light and Screen Setting Difference, [...]
2Pcs Vehicle W5W T10 Rubber Glass LED Light Base Automotive Goods Parking Lights Socket Car Accessories товары Item specifics: New: A brand-new, unused Quantity: 2 pieces Nut: 14mm +/- 0,5mm Socket: T10 W5W - W2,1X9,5D Cable: with cable, cable length approx. 10cm Material: Rubber Manufacturer: Lights & Parts Reference number s OE: Rubber socket, flexible, with groove Referenznummern OEM:Lampenfassung, Lampenstecker, Gummifassung, für roller, atv, quad, motorrad krad, pkw, kfz, 5Watt, 3Watt, 3 oder 5 watt Rechts Current: max. 0.5 amps Cable length: 10cm Plug material: heat resistant rubber Package included: [...]
Description: How to use: Wrap the cloth over coating sponge Put coat liquid on the cloth Spread the liquid on the car Use towel to wipe and polis Specifications: Type: Car liquid ceramic coat Material: Polysiloxane and other Nano materials etc Hardness: 9H Durability: 3-5 years Coating Thickness: 30um Gloss: Excellent high gloss effect, shiny as mirror Anti-corrosion: PH tolerance: PH2-12 Heat Resistance: Up to 760 degree Consumption: 30ML Package Included: 1 x restorant, 1 x sponge, 1 x cotton [...]
U.S. buyer attention: The areas where the US warehouse does not deliver goods are: Hawaii, Alaska, Puerto Rico, Guam and other US overseas territories. And the military address. Spanish buyers attention: if your address includes following postal code please do not choose the Spanish warehouse. The zip code starts with 51/52/07/35/38/28. Overseas warehouse cannot be delivered. 100 Brand New and High Quality Material:Sponge Dimensions: 17x10x7.5cm / 5.51x3.93x2.95in Color:Yellow Natural shape, safe and scratches. Superior wear and durability. A cotton multi-use, safe and scratches. Scope: Paint, tires, wheels, rubber and other parts [...]
Car Cleaning Battery Post Terminal Cable Cleaner Dirt Corrosion Brush Hand Tool Feature: High quality material 100 brand new Stable and powerful Rugged and durable, not easily damaged. There are 2 places for cleaning, the top is used to clean the oxide layer on the electrode column, and the open brush is used to remove dust and debris from the dead corner of the battery. Stainless steel brushes for continued long use Cleaning battery terminal assures longer battery life Improve the performance of the battery roduct description: Material: stainless steel Quantity: 1Set Color as shown [...]
Reviews
There are no reviews yet.