Additional information
Origin | Mainland China |
---|---|
Feature | Stocked |
Model Number | 787H |
Material | Plastic |
Plastic Type | Melamine |
Type | Kitchen Lighters |
Certification | CE / EU |
415.00 $
50 in stock
Origin | Mainland China |
---|---|
Feature | Stocked |
Model Number | 787H |
Material | Plastic |
Plastic Type | Melamine |
Type | Kitchen Lighters |
Certification | CE / EU |
Function description of alcohol-based fuel vaporization controller for precise regulation of firepower
The controller is used for electric heating and alcohol-free gasification stove without fan, in addition to the functions of conventional heating, temperature measurement, temperature control, ignition, electromagnetic pump speed regulation, etc., it can also expand external precision regulator to achieve precise adjustment of oil pump flow and Start-stop control, this function and gear position adjustment achieve the effect of no need to switch, fire with heart, start and stop freely. At the same time, it can also extend the external word reset rocker switch or the third gear self-reset switch to achieve more convenient gear position control.
The controller's stability, suitability and user-friendly design are surprising and the most cost-effective controller in the alcohol-based fuel gasifier industry. Basic parameters 1, rated working voltage: AC220V 2, normal working voltage range: AC187-242V
3, the service life: the number of actions is not less than 100,000 times 4, heating output power: no more than 3000W
5, ignition output: AC220V, power is not more than 100W
6, electromagnetic pump output: AC220V, power is not more than 100W, full power range PWM voltage regulation 7, temperature probe: K-type thermocouple
8, operation expansion: can be connected to a word rocker switch or three-speed self-reset switch External precision regulator Wiring instructions
1, 123 wiring position is the expansion interface of the increase and decrease gear switch, which is convenient for the user to connect an external two-way rocker switch or a three-speed self-reset switch. The external switch can make the chef adjust the firepower. In the wiring, 1-3 is connected to a set of normally open contacts of the switch; 2-3 is connected to another set of normally open contacts of the switch. If the operation direction of the firepower adjustment does not conform to the usage habits when the switch is connected, the 1 and 2 wirings can be adjusted.
2, 3, 4, 5, 6 wiring is the expansion interface of the precision regulator, according to the color wiring. It is convenient for the user to finely adjust the firepower, and can also start/stop operation.
3, 7-8 wiring is connected to K-type temperature measuring thermocouple, of which 7 is connected to the negative terminal and 8 is connected to the positive terminal.
4, 9-10 wiring is connected to 220V AC power supply, leakage circuit breaker and a bipolar switch should be installed on the power supply to play a role in reliable control of total power supply and safety protection.
5, 11 – 12 wiring is connected to the heating tube, the internal switching device uses high-power relays, and uses a unique switch control technology, the heating tube power can be fully qualified within 3000W, and the life is greatly extended than the conventional.
6. 13—14 The igniter is connected to 220V AC voltage and power less than 100W. High-energy igniter or super igniter can be selected according to requirements. The current general igniter power is far less than 100W, so the conventional igniter can match.
7, 15 – 16 wiring is connected to the electromagnetic pump, the output voltage is adjustable AC voltage, due to the use of a unique microcomputer-controlled high anti-interference non-contact PWM full power adjustment technology, even when the ignition is ignited Stable output, no malfunction. Matching with commonly used imported electromagnetic pumps allows the electromagnetic pump to perform optimally. Setting instructions
The following instructions are all performed when the controller's settings are in the factory state, the controller is connected to the thermocouple, and the power is turned on. Whether other interfaces are connected or not connected does not affect the setting operation.
After the controller is powered on, all the digital tubes and LED indicators will be lighted up. You can use this opportunity to check whether there are any missing or missing lights. Finally, the digital tube displays OFF, which is the shutdown state. In this state, the setting operation cannot be performed.
Press the start/stop button in the off state, the system enters the preheating or holding state, and the red and green digital tubes respectively display the current temperature value and the target temperature value. The current temperature value is the temperature measured by the current thermocouple, and the target temperature value is the heating stop. temperature. In this state, you can perform the setting operation:
1. Modify the output power parameter of the electromagnetic pump: press and hold the setting button for about 5 seconds, the red digital tube displays d-1, indicating that the first power output parameter setting state is entered, and then press the setting button, the green digital tube displays the current output of the gear. The percentage of power, at this time press the increase and decrease buttons, the power output parameters can be adjusted between 0-100.
★ Parameter confirmation save: adjust the parameters, press and hold the setting button, the number starts to flash until the red display SAU, indicating that the parameter is saved successfully, and the system exits the setting state. The same applies to the following, and will not be described again.
★If you need to adjust other gear parameters after adjusting the first gear parameters, you can press the setting button when the green value is displayed. At this time, the green value is off and the data is temporarily stored. Press the increase/decrease button to enter d-2, d-3 and other gears in turn, and set the parameters according to the above method. Finally, press and hold the setting button until SAU is displayed, and all parameters are saved before one time.
★If the above operation does not long press the setting button and display SAU, the new parameters will not be saved. If there is no operation for a few seconds or the start/stop button is pressed, the system will exit the setting state and the system will still run according to the original parameters.
★d-1 first file default value 24; d-2 second file default value 28.2; d-3 third file default value 32.3; d-4 fourth file default value 42; d-5 fifth file default value 49.
2. Modify other parameters: Press and hold the setting button and the increase button for about 3 seconds at the same time. The red digital tube displays SP, and the bottom parameter setting state has been entered.
★ Press the minus button when displaying the SP, and display the menus Ao1, HHH, SC, ddH, odH, oPP, SPP, SoP, FHS, SEP, etc. in order.
1 SP menu is the target temperature value option; default value: 190 ° C; setting range: 130-300 ° C.
★Parameter meaning: heating to this temperature stops preheating.
★ At this time, press the setting button, the green digital tube will display the target temperature value, press the increase and decrease buttons to change the parameters, and the parameter confirmation save method is the same as before. The same applies hereinafter and will be omitted.
★ If you do not press any button for 5 seconds, the setting state will be automatically exited, and the parameter will not be memorized.
2 Ao1 menu is the ignition start temperature value option; default value: 130; setting range: 100-190 °C.
★ Parameter meaning: After reaching this temperature value, it is allowed to start work.
3 HHH menu is the high temperature protection value option; default value: 450; setting range: 400-500 °C.
★ The meaning of the parameter is: After the temperature is reached, the system automatically protects and stops the electromagnetic pump output.
4 SC menu is the error correction value option; default value: 0; setting range: ±20 °C.
★ The meaning of the parameter is: When the current temperature is found to be different from the value measured by the standard thermometer, this value can be set according to the error value to correct the current temperature value to reduce the error.
5 ddH menu is the delay ignition time option; default value: 0; setting range: 0-20 seconds.
The meaning of the parameter is: After the electromagnetic pump is working, the ignition output will be started after the corresponding time delay.
6 odH menu is the continuous ignition time option; default value: 6; setting range: 1-20 seconds.
The meaning of the parameter is: After the electromagnetic pump is working, the ignition output will stop after the corresponding time.
7 The oPP menu is the boot gear option; the default value is 2; the setting range is 0-5.
The meaning of the parameter is: the output power gear value of the electromagnetic pump at the time of starting.
8 SPP menu is the shutdown gear option; default value: 1; setting range: 0-1.
The meaning of the parameter is: 1 is automatically returned to the 2nd gear after shutdown, and then the boot is 2nd gear. 0 is to keep the original gear after the shutdown, and then the original gear is activated.
9 SoP menu is the startup mode option; default value: 1; setting range: 0-1.
The meaning of the parameter is: when the parameter is 0, the system can only be started by pressing the start/stop button or by the precision adjuster; when the parameter is 1, the system adds the function that can be started by pressing the add button, the rocker switch or the right-hand precision adjuster. .
10 FHS menu is soft and hard start option; default value: 0; setting range: 0-1.
The meaning of the parameter is: 0 is a hard start, that is, booting directly from the start gear. 1 is a slow start, that is, it automatically rises from the 2nd gear slowly when it is turned on, until it increases to the gear position before the shutdown. Slow start is only valid when the SPP parameter option is 1.
11 SEP menu is the fine pitch step option; default value: 1; setting range: 1-20.
The meaning of the parameter is: the adjustment amount corresponding to the minimum angle of rotation of the external precision regulator can also be understood as the speed adjusted during rotation.
3. Restore the factory settings: the controller is powered off, press and hold the minus button and turn on the power at the same time. Press and hold the setting button when rEr is displayed. The display will flash to SAU and the factory setting will be restored successfully. All the parameters that can be set are returned to the factory. status.
Working process: described under the premise of factory setting
Power on for about 5 seconds to complete the power-on process and enter the OFF state. Press the “Start/Stop” button to enter the warm-up state, display the current temperature and target temperature and the gear position. The output of the heat pipe has an output to start heating, and the preheat lamp lights up. When the temperature reaches 130 °C, the running light starts to flash, indicating that you can start the vaporization ignition by pressing the “Start/Stop” button or the key. After the start, the running light will turn to the normal light, and the ignition and electromagnetic pump will start to output and simultaneously ignite and vaporize the light. On, after 6 seconds, the ignition output stops, the ignition lamp also goes out, and it enters the combustion state. At this time, there is still output at the output end of the heating pipe, and the preheating lamp is still lit until the current temperature reaches the target temperature to stop the heating output and extinguish the preheating lamp.
After the current temperature reaches the target temperature, if the operation is not started by pressing the “Start/Stop” button, the system enters the thermal insulation working state, and the heating and heating is automatically performed. The temperature of the burner is always maintained near the target temperature, ready to start working.
During the combustion process, press the “Increase” button to gradually increase to the maximum gear position. Press the “Decrease” button to gradually decrease to the minimum gear position, then reduce the work stop. Press the “Add” button to turn it on again.
After the machine is stopped, press the plus button, rocker switch or precision adjuster to start the machine. It is started from the gear position before stopping.
After the machine is stopped, press the start/stop button or press the precision regulator to start it from the default gear position of the system.
Press and hold the “Start/Stop” button for about 3 seconds during the warm-up or combustion work, and the system will enter the OFF state. Precautions:
★ The temperature value does not rise and fall during the heating process, indicating that the polarity of the thermocouple is reversed.
★ When the highest-grade setting value is too large and the pump oil exceeds the vaporization capacity of the burner, flame instability will occur.
★When the starting temperature setting value is too low, the flame will be unstable due to insufficient vaporization.
★The controller adopts the instrument structure design, and its structure itself does not have waterproof function. It is suitable for being embedded in the control box panel. It is required to have the sealing structure and related sealing measures to ensure that the circuit will not be damaged due to moisture ingress.
★ If you find that the flame is unstable when you just click it, you can set the ignition to delay a few seconds to start the ignition, and at the same time, raise the starting temperature appropriately, that is, try to make the vaporization working state stable and re-ignite. Experience has shown that this effect will be much better. .
Main function description of commercial steam boiler ignition controller: First, the product features: 1, working voltage: 175V-245VAC 2, with water level detection, water shortage protection. 3, with wind pressure switch safety protection control fan, if no wind pressure switch, the wind pressure switch line is short-circuited. 4, with pseudo-fire, residual fire safety protection 5, with accidental flameout safety protection. 6, with a fault alarm prompt function. 7, control a 3V [...]
71.25 $ Add to cartDQ8 basic parameters The DQ8 high-energy igniter developed by the company is AC220V igniter, with strong ignition capability, stable and reliable performance and high ignition efficiency. It is widely used in commercial energy-saving stoves, boilers, burners, steamers, ovens and other commercial equipments that use gas and methanol as fuel. 1, product model: DQ8. 2, the main function: delay super ignition, low-voltage switch start. 3, working voltage range: AC175V-245. 4, the service life: ≥ 100,000 times. 5, ignition intensity: super ignition, can ignite flammable gas and various alcohol-based biofuels. 6, ignition high pressure: ≥ 15Kv. 7, delay to stop the ignition [...]
78.75 $ Add to cartFunctional Overview BF-15B + microcomputer temperature difference controller, directly set the temperature difference upper limit to achieve the effect of temperature control of the water cycle, the panel is simple and convenient to operate. To make hot and cold water cycle, mainly by improving the thermal efficiency high and low temperature difference between the value measured by the sensor and the upper and lower limit set temperature difference. Mainly used in hot water circulation system backwater control. The main function Function Name Function Description Temperature control when the temperature difference T ≤T limit, normally open relay disconnected, normally closed pull; [...]
82.00 $ Add to cartN5/N5K/N5F/N5B Controller function description V3.0 and above 1. Function introduction This controller is an integral plastic case moisture-proof structure, with its own lead wire, fan control, igniter control, electric Magnetic pump control, 5-speed firepower and fine-tuning stepless firepower adjustment, multiple start-stop controls are convenient and flexible, and each parameter can be Custom settings. . Model description: N5 is a general type: N5B Adds the front valve of the pump to the general basis: N5K, in the general type Add external connection, pressure cooker flame off/pressure cooker on fire/foot switch/quick start-stop switch, etc. functions can be followed according to Need to [...]
94.45 $ Add to cartBasic parameters 1, rated working voltage: AC220V 2, normal working voltage range: AC187-242V 3, the service life: the number of actions is not less than 100,000 times 4, fan power: no more than 600W 5, ignition output: AC220V, power is not more than 100W 6, electromagnetic pump / valve output: AC220V, power is not more than 100W 7, circulating water pump output: AC220V, power is not more than 1000W Wiring instructions 1. Brown-blue black sheathed wire: Connected to 220V AC power supply, the leakage circuit breaker and a bipolar switch should be installed at the front end of the power [...]
140.00 $ Add to cartY2 commercial gas stove flameout safety protection ignition controller function description This controller is used on commercial stoves, can realize automatic high-energy ignition, accidental flameout protection, and meet the automatic control and safety protection of modern kitchen stoves. 1. Basic parameters of Y2 commercial stove flameout safety protection controller 1. Product model: Y2. 2. Operating voltage range: AC175-245V 3. Service life: ≥100,000 times 4. Ignition intensity: high-energy ignition, which can easily ignite combustible gas and various alcohol-based biofuels. 5. There is a safety protection function for accidental flameout. When the flameout is accidentally closed, the solenoid valve will be turned [...]
146.25 $ Add to cartF2 type with fine adjustment anti-air burning commercial stove controller description The controller is suitable for the alcohol oil electromagnetic pump injection combustion system with blower, has infrared automatic air defense burning function, external igniter, can realize automatic high energy ignition and air defense burning, can meet the automatic control and safety energy saving needs of modern kitchen stoves. . Basic parameters 1, rated working voltage: AC220V 2, normal working voltage range: AC187-242V 3, the service life: the number of actions is not less than 100,000 times 4, fan power: no more than 300W 5, igniter power: AC220V, no more [...]
208.75 $ Add to cartcute formal jumpsuits champagne romper hot romper romper robe sweatshirt romper womens black romper with train yellow romper for women unitard romper tie back romper grey bodysuit romper baby ruffle romper eyelet romper tiered romper warm romper lounge romper full body romper sweatshirt romper womens romper with denim jacket dark blue romper black button up romper korean romper black tie romper lace romper lingerie blazer romper romper with denim jacket flower romper grey bodysuit romper picnic sweater romper dupe yellow romper for women black long romper lace romper lingerie dark purple romper black maxi romper hiking romper unitard romper printed [...]
54.26 $ Add to cartPortable Electric Arc Lighter USB Rechargeable Windproof Electronic Lighter Eco-friendly Aromatherapy for Candles Gas Stoves Feature: 1.Windproof and Flameless Technology: The Arc lighter adopt windproof design and flameless plasma technology to protect the electric pulse from being blown out by strong wind or wet weather. 2.Safty Protection: Its so much easier to light candles with this than traditional butane lighters or matches. A safety lock design keeps children away from fire. The long and flexible soft head allows you to keep a safe distance from sparks. 3.USB Charging: The lighter uses a [...]
360 Rotation BBQ Lighter USB Windproof Flameless Kitchen Plasma Ignition for Gas Stove Candle Barbecue Specification: Product size: Length 260mm Product material: aluminum + zinc alloy Product packaging: Blister packaging Charging port: type-C Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. 1 X BBQ Lighter 1 X USB Cable [...]
Commercial stove infrared anti-air burning controller function description The controller is a commercial stove controller without fan control the fan can be independently controlled, which can realize automatic high-energy ignition and anti-air burning, and meet the needs of automatic control and safety protection of modern kitchen stoves. Controller working process: The controller turns on the power switch, starts ignition, opens the air valve, and after 12 seconds, the ignition stops and enters the combustion state. At this time, the infrared sensor head and the receiving head constitute a pot sensor to detect whether there is a pot on the furnace, [...]
177.50 $ Add to cartFeatures:Flame and temperature can be adjusted, the temperature can be as high as 1350°Wind proof, moisture proof and water resistant, better than electric welding.Fully automatic electronic ignition, safe and easy.Ergonomic design for comfortable holding in the hand.Suitable for restaurant, household, picnic, hiking, camping and other outdoor activities.It can be fixed on butane tank, which can be replaced, cycle use is value: 50 -140g / h. A can of gas can use 1.6 hours to 2 hours continuously, replace the new tank just need a little seconds. Note:1. Please keep away from the kids.2. Power off when you change the [...]
Features: x 1. It is made of high-quality copper and plastic, sturdy and durable. x 2. It is suitable for restaurants and household to make food. x 3. Unfreeze meat and water pipe. x 4. Use for the heat-shrinkable sleeces and their connectores. x 5. Be applied in microwelding involving copper-welding, silver-welding, tin-welding and ornament processing. x 6. It can be fixed on butane tank, which can be replaced, cycle use is value: 50 -140g / h Material: Copper,PlasticFlame temperature: 1300°, flame temperature adjustableThere must be the use of butane gas cartridge. Not includedPackaging includes:1 x Flame GunNotes:1.The [...]
Features: Not easy to fall; durable Valve cap high pressure H low pressure L size cap Add fluid and fluoride mouth general-purpose dust cap Specifications: Material: plastic Color: blue Applicable models: universal Product size: High pressure: 18 x 18 x 9mm/0.71 x 0.71 x 0.35 Low pressure: 15 x 15 x 11mm/0.59 x 0.59 x 0.43 Gross weight: 2g 1 x High pressure Car A/C Valve Cap 1 x Low pressure Car A/C [...]
Double Ended Car Air Conditioner Vent Slit Brush Blinds Keyboard Cleaner Versatile Auto Cleaning Brush Clean Tools Features: 1. Double-headed design, with one end cleaning air outlet and one end cleaning instrument panel; 2. Micro fiber cleaning cloth, soft and delicate, three brush flaps for thorough cleaning; 3. Elastic handle, easy to grasp, can be controlled according to the thickness of blinds or air conditioner blade; 4. Car cleaning brush, can be used to clean air conditioning blades. Specifications: Material: microfiber +PP Color: grey Product size: length: 16.5cm/6.50, hair length: [...]
Black Spectacle Clip Car Accessories Sun Visor Sunglasses Eye Glasses Card Pen Holder Clip Voiture Accessory Dropshipping Feature : 100 Brand new and high quality This item can holds your glass, Sunglasses in your car Give you more convenience Easy to use,Fasion design Specification: Material: P lastic and alloy Color: Black Usage: Size:Approximate 7.5 x 4x 2cm Package Content: 1X [...]
Description: Accidental bumps and scratches? Before you freak out, a simple wipe of this will make your car look brand new again... Car Scratch & Swirl Remover This ultimate paint restorer not only removes swirls and scratches. It also restores the gloss and shine of your paint! Saves your car from hard scratches and swirls brought about by accidents or bumps. Simply apply appropriate amount and wipe. Instant nice and shine! It fills in the damaged areas, making your car look free from bumps and dents again. Apply it without hesitation on your car. Its especially formulated to avoid [...]
Description: Color and Luster Restoration: Repair compound works on that level to polish off stubborn dirt, scratches, and other blemishes via a special chemical reaction. Polishes and Protects: Has special decomposition grind sand that quickly removes scratches by deep polishing on a microscopic level, while leaving a protective layer. Non-Damaging: Does not damage your car’s paint job, unlike other repair product that contains corrosive chemicals and ingredients. Multi-Purpose: Not just remove light scratches but also stubborn stains, dirt, and even rust. Specifications: Ingredients: Abrasive Materials, Surface Active Agent, Filling Agent Weight: 30g Size: [...]
42.08 $ Add to cartDescription: 1. Refrigerator DC cord for the portable freezer car freezer refrigerator.2. Ultra-long power cord to meet the needs of use.3. Its perfect for keeping everything nice and fresh when youre on a family trip or picnic in the Material: PP + copper coreSize: The line length is about 1.8m/70.87in, total length is about 2m/78.74inPower supply: oxygen-free copper wire coreFeatures: smaller resistance, better conductivity, and more power savingProduct list:1 x Car Refrigerator Power CordNotes: Due to the lighting effects and shooting angles, there is a color difference in the product, please understand.Due to manual measurement, there is [...]
Description: Include the package and you will get 10 car vent trim strips.Personalize your car air vents to make your car look more stylish and elegant.A variety of colors for your choice, there are electroplating silver, electroplating blue, electroplating red, electroplating purple, a total of 4 colors.Easy to use, cut to the length you need, put the strip into the air outlet, click, and youre done.High-quality chrome plated PVC soft material, reusable and Name: Car Vent Outlet TrimsQuantity: 10Material: PVCFeatures: U-shaped, easy to install, beautiful, car interiorLength: 20 List: 10 x Car Vent Outlet TrimsSee more product [...]
Descriptions: It can protect peoples necks and shoulders.Simply wrap it around your seat belt.It can be adjusted by hook and Material: ice silk flannelColor: Black, pinkSize: List: Car Seat Belt Cover x 1 PairSee more product details1.Ice Silk Flannel Material: Manufactured from ice silk flannel, car seat belt cover is soft, and wear-resistant to provide a comfortable user experience.2.Stable Protection: Car seat strap covers can effectively prevent discomfort on the neck caused by belt friction and provide better padding in case of braking or an accident.3.Can be Adjusted: Seat belt cushions are easy to wear with the adjustable [...]
Car Paint Scratch Repair Agent Polishing Wax Scratches Repair Remover Automotive Beauty Care Tool Description: Car Polishing Wax is an instant repair solution for any scratches, swirls or marks on your car. It is specially designed to protect your car from scratches and restore its shine and shine to restore its lustre. It is formulated without any wax, so scratches are guaranteed to be polished rather than filled. You can quickly and easily remove years of wear and tear from your vehicles paint because the compound combines a medium cut with a fine finish. Contains premium [...]
Reviews
There are no reviews yet.